* fix(apple): report a connector that cannot name its owner as an omission
A connector is recognized by class name and then dropped by an early
`continue` when its owner cannot be resolved. Nothing recorded the drop, so
connection coverage derived `complete` with `examined: 0` and `omitted: 0`
for a connector that was present, recognized and discarded.
Both producers of that coverage contract are affected and are changed
together, because they share the facet and the reason value:
- the keyed-archive parser records the drop as `unresolvedConnections` and
reports it through the `connections:<path>` facet, the document
`connection_count` and the graph omission total;
- the NIBArchive projection in the artifact adapter recorded nothing at all,
and the projected dictionary carried no trace of the dropped connector for
a downstream consumer to find. Its count is taken where the connector is
discarded and plumbed through the same per-document omission channel that
already carries incomplete hierarchies, so the reason follows the cause.
An unresolved source cannot be represented as a connection at all, because
connection identity requires a non-empty source; that is unlike an unresolved
destination, which the graph already retains as an unresolved edge.
`connection_limit_reached` stays reserved for connections dropped by the hard
cap and `serialized_view_hierarchy_incomplete` for hierarchy omissions.
`connection_count` also includes the unresolved connectors. That field already
counts connectors the parser recognized but could not emit, because
connections dropped by the hard cap are counted there too, so unresolved
connectors follow the existing rule rather than a new one.
Verified with 98 focused Interface Builder and catalog tests, check:fast and
verify:test-discovery on macOS arm64, and through the public CLI: a rooted
archive holding one ownerless UIRuntimeOutletConnection reported complete with
examined 0 and omitted 0 before this change and reports partial with the reason
connection_unresolved and omitted 1 after it.
* fix(apple): count ownerless NIBArchive connectors and keep the limit reason
Greptile found two defects in the NIBArchive half of this change.
The document summary was left unchanged, so the same recognized connector
counted as one in a keyed archive and zero in a NIBArchive. The dictionary
parser only sees connectors that were projected, so the omission recorded
where the connector was dropped is added to the matching document here.
The facet reason was overwritten unconditionally, so a NIBArchive holding both
a connection dropped by the limit and an ownerless connector reported
connection_unresolved and lost the cause a higher limit could recover. The
existing reason is kept when the graph already named one, which is the
precedence the keyed-archive producer applies.
Verified with `npm run test:focused` over the bundle suite (42 passed, 1
skipped), `npm run lint` (0 errors) and `npm run check:fast` on macOS arm64.
Reverting the reason precedence alone fails only the limit case; reverting the
document count fails the count assertion in both cases.
The new case moved into its own describe block because the enclosing callback
crossed the repository's max-lines-per-function bound otherwise.
---------
Co-authored-by: 吴佳浩 <wujiahao@supremind.com>
Command Line Tools install the /usr/bin/ibtool and xcrun shims without ibtool itself, so the existing /usr/bin/ibtool existence guard never skipped the storyboard test, and the native NIB hierarchy suite had no guard. On a Command Line Tools-only macOS host these seven tests failed at fixture compilation. Probe xcrun --find ibtool once and use it for both suites.
Select authoritative connection fields by runtime class in a shared owner used by keyed archives and NIBArchive projection. Preserve archive identities, endpoint relationships and coverage, and replace duplicate synthetic outlet assertions with a rooted public CLI fixture.
Validation: compiled CLI acceptance against the issue-sourced rooted UIKit fixture and 41 filesystem tests. Native UIKit framework validation was not rerun. Fixes#2177.
Reuse the bounded binary preflight to observe dictionary keys before the pinned decoder drops them. Keyed archive results disclose the omission and Interface Builder marks archive decoding partial. XML keeps its existing exact counts; binary reporting deliberately leaves the count unknown because overwritten subtrees and decoder projection can change visibility.
Remove the superseded size-only preflight contract. Cover ASCII, UTF-16 and extended lengths, shared references, nested and shadowed dictionaries, and the value-only negative control. Synthetic plist and filesystem fixtures; no plutil or ibtool verification.
Fixes#1594. Supersedes #1593.
* fix(artifacts): project compiled AppKit actions from the control to its target
NSNibControlConnector archives the sending control as NSSource and the
action target as NSDestination; a nil target is the first responder. The
NIBArchive projection swapped them for control connectors, so every
compiled AppKit action ran from its target to the control. The action
trace, which follows control -> action, could not find them, and the
selector node was keyed by the control instead of the target class. When
the target was nil, the swapped source was null and the action was
dropped: Chess lost 29 menu actions, KeepingYouAwake 7.
Connectors now keep NSSource -> NSDestination. The NIBArchive test
encoder moves to a fixture module so a bundle test can build compiled
NIBs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): report observed action routes when a compiled route is missing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): report compiled connector records when a storyboard route is missing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(artifacts): write the storyboard fixture's action in Cocoa syntax
MacFixture.storyboard declared its button action with the iOS attribute,
<action selector="buildTapped:" destination="vc1">. Cocoa documents
name an action's receiver with target=. ibtool compiled the iOS spelling
into an NSNibControlConnector whose NSSource is the view controller
placeholder and whose NSDestination is the button. That is the reverse
of what Xcode-authored AppKit NIBs contain (Music, Chess,
KeepingYouAwake, and Transmission all archive NSSource as the control),
and it is what the old inversion had matched. With target= the compiled
fixture archives the button as NSSource. The temporary connector dump is
removed; the observed routes remain in the assertion message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Compiled UIKit NIBs and storyboards archive outlets and control actions
as UIRuntimeOutletConnection and UIRuntimeEventConnection with
UISource, UIDestination, and UILabel. The NIBArchive projection
recognized only AppKit *Connector classes with NS-prefixed keys, so an
iOS app produced no outlet or action edges: Stash's 64 decoded documents
yielded none. These connections are now projected with the same
source -> destination roles, an event connection carries its
UIEventMask as ui_event_mask, UIClassSwapper reports its UIClassName,
UIProxyObject is a placeholder, and connection records are no longer
emitted as unknown objects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MacFixture.storyboard declared its button action with the iOS attribute,
<action selector="buildTapped:" destination="vc1">. Cocoa documents
name an action's receiver with target=. ibtool compiled the iOS spelling
into an NSNibControlConnector whose NSSource is the view controller
placeholder and whose NSDestination is the button. That is the reverse
of what Xcode-authored AppKit NIBs contain (Music, Chess,
KeepingYouAwake, and Transmission all archive NSSource as the control),
and it is what the old inversion had matched. With target= the compiled
fixture archives the button as NSSource. The temporary connector dump is
removed; the observed routes remain in the assertion message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NSNibControlConnector archives the sending control as NSSource and the
action target as NSDestination; a nil target is the first responder. The
NIBArchive projection swapped them for control connectors, so every
compiled AppKit action ran from its target to the control. The action
trace, which follows control -> action, could not find them, and the
selector node was keyed by the control instead of the target class. When
the target was nil, the swapped source was null and the action was
dropped: Chess lost 29 menu actions, KeepingYouAwake 7.
Connectors now keep NSSource -> NSDestination. The NIBArchive test
encoder moves to a fixture module so a bundle test can build compiled
NIBs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
decode_interface_builder failed on every flat (keyed-archive) NIB that
holds plist data or dates. Archived colors keep their components as
data, so this covers nearly every AppKit NIB: XLD.app decoded 0 of 64.
The decoded Uint8Array and Date values failed JSON validation. They now
use the shared plist projection, which keeps them as explicit
$plist_type values.
Decoding those archives exposed a second failure. The keyed-archive
parser inlined every UID reference up to 16 levels for every object, so
an archive whose views reference their window, superview, and next key
view expanded exponentially. A 9 KB NIB took 3 s, and a 158 KB
MainMenu.nib did not finish. A reference now resolves to its string, or
to a stub naming the referenced object's archive UID, authored ID, and
class. The hierarchy walk visits each object once. The parser also reads
XML CF$UID references and treats UID 0 as nil.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#885 decodes XML plists that contain a __proto__ key by omitting those
entries, but signature entitlements and Interface Builder plists dropped
the omission count. inspect_signature returned an entitlement set that
looked complete, and archive_decode stayed complete. Both now report the
omission: a signature limitation, and a partial archive_decode facet with
reason dictionary_entries_omitted and a per-document limitation.
The placeholder that stands in for __proto__ was reserved against the raw
XML text, so an entity-encoded key such as __rea_prototype_key__
decoded to the placeholder and was omitted as if it were __proto__. The
placeholder is now reserved against the decoded text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>